How To Setup Your ASUS RT-AX86U Wi-Fi Router

The Asus RT-AX86U setup is the first thing you need to do when you buy a new Asus wireless router. When you buy a new router, its settings are set to factory defaults. Therefore, you are required to configure the router with your modem and establish the internet connection on your network. Once you set up the internet connection, you just have to configure some wireless settings to get your device up. 

It is important that you set up your new Asus WiFi router properly in order to avoid any issues later. The hardware setup comes first and then you can proceed with the router configuration. Most new users are often worried about the setup part and hence they tend to call a few technicians and search over the internet. 

However, you don’t have to call anyone or go anywhere. We have come up with this post to help all new Asus router users to go about the Asus RT-AX86U setup and installation. You can refer to the topics given on this page to learn about the Asus router setup. Let’s set up the new Asus wireless router!

Simple steps for Asus RT-AX86U setup

Before you proceed with the setup, you must establish a physical connection between all the hardware involved in the installation. You just have to pair your router with the modem and power On both devices. Use an Ethernet cable to connect the router to the modem. Attach the power cord to the router and power it ON. 

Once you complete the hardware setup part, you should start following the steps below:

1. Accessing the router’s web interface

• First of all, you need to go to your router’s web interface. 
• You can access your router via router.asus.com. 
• Enter the default web address on a PC connected to your router’s network.
• Make sure you enter the URL in the address bar and then press Enter. 
• After that, you will reach the Asus router web interface. 

2. Setting up a secure wireless network

• You will directly land on the Asus RT-AX86U setup wizard.
• Thereafter, you just have to follow the on-screen instructions. 
• Detect the internet connection on the network. 
• After that, configure the wireless settings of the router. 

3. Changing default login credentials

• Once you complete setting up the router, you need to set up the default login credentials. 
• Set up a username and password for your router. 
• You can change the login credentials if you want. 
• Otherwise, the default login credentials will be in place. 

4. Configuring port forwarding and DMZ settings

• Do you have any devices that you wish to access within the network? 
• If you have CCTV cameras or any other devices, you can set up port forwarding. 
• To set up port forwarding on your device, you need to follow the on-screen instructions. 

5. Enabling Quality of Service (QoS) for improved network performance

• Quality of Service is a feature that optimized traffic control and performance of your device on its own. 
• You can either enable or disable the QoS service. 

6. Enabling parental controls and guest networks

• If you have kids at home and you wish to keep them safe from explicit content on the internet, you should set up parental controls. 
• You can also set up a guest network to let your guests connect to it whenever they come. 
• This will not hamper the performance of your main WiFi network. 

7. Other customization options

• Finally, you just have to go through some other customization options. 
• At last, click Save. 
• The Asus RT-AX86U setup and installation will complete successfully. 

Troubleshooting common Asus RT-AX86U setup issues

It is pretty common and obvious to face issues while attempting to configure the new Asus router. Well, you don’t have to worry about anything if you come across any problem with your device or the network. You can refer to the below-mentioned tips and tricks to get rid of the issue and set up your device without any hassle:

1. Resetting the router to default settings

• Firstly, abort the setup process and reset your device. 
• Locate the reset button of the Asus RT-AX86U router. 
• Most likely, it will be there at the backside of your device. 
• Take a paperclip and press the button. 
• Make sure you hold down the Asus router reset button for 10 seconds. 
• Release the button and wait for a few seconds. 
• Finally, the router will be reset to the factory default settings. 

2. Diagnosing connectivity issues

• Now, you need to ensure that the router is properly connected to the modem.
• You should only use the RJ45 Ethernet cable to connect the router to the modem. 
• Make sure the cables are not showing any signs of wear and tear. 
• After that, re-attempt to go about the Asus RT-AX86U setup. 

3. Updating firmware and software

• If you still face the same issue, you need to go about the RT-AX86U firmware update. 
• Follow the on-screen instructions to update your router’s firmware. 
• Once your router’s firmware is updated, you can cross-check if the router is working fine or not.
  

4. Contacting customer support

If the issue persists, we suggest that you get in touch with our support team for more help. Our support team will help you get rid of the problem in no time. 

Conclusion 

The Asus router setup is one of the most simple processes with a few complexities at the same time. A user is required to ensure the utmost attention to the instructions in order to set up the device without any hassle. This post was all about the Asus RT-AX86U setup and configuration. We hope that we were able to help you set up your new Asus wireless router without any complexities. 

However, if you face any issues or come across any doubts while attempting to set up your device, you can feel free to reach out to our support team. Our support team will ensure to extend all the possible assistance to help you get rid of the problems with your device.